TACK-30™
PLANTAGO BASED MULCH TACKIFIER
PDF Product Sheet |
Pdf MSDS Sheet |
TACK-30™ – PLANTAGO BASED MULCH TACKIFIER
Meets Arizona DOT Specifications for Tacking Agent 805-2.06
PRODUCT DESCRIPTION
TACK-30™ is a tackifier manufactured from psyllium or plantago husk powder. Plantago husk powder contains a naturally evolved mucilloid that is an effective adhesive when applied as a slurry with fiber or paper mulch or as an overspray to bond straw fiber. Every manufactured lot of TACK-30™ is tested by Rantec Corporation to meet a minimum swell of 30, guaranteeing a consistent quality plantago product.
APPLICATION GUIDELINES
The following are general guidelines only. Consult your distributor for specific site related recommendations.
GENERAL USEAGE RATES PER ACRE
| Straw Over Spray | Fiber Mulch | |
| Mulch, lb/acre | 200 | 2000 |
| TACK-30™, lb/acre | 100 | 75 |
| Water, gal/acre | 700-1500 | 3000-4000 |
MIXING INSTRUCTIONS
Fill the tank so the lower agitator blades are covered with water. Add the required amount of
TACK-30™ while operating the agitator at high speed. Add water while adding mulch, fertilizer, and seed.
Specifications
Tack 30 has a minimum swell volume of 30 ml/gram.
PACKAGING
TACK-30™ is packaged in 50 lb polywoven/polylined bags, 40 bags per pallet with stretch-wrapped cover and pallet liner.