PRODUCT DESCRIPTION

H3 Tack is a blend of three hydrocolloidal tackifiers bringing together the benefits of each polymer into one easy-to-use additive. H3 Tack is specifically designed for use as a hydraulically applied erosion control tackifier. H3 Tack is used as a stand-alone temporary erosion control product or with wood, paper, or other native fiber mulches to provide superior bonding strength.

APPLICATION GUIDELINES

It is recommended that H3 Tack be applied at 10 to 25 lbs per 1000 gallons of water depending on machine capacity. When used as an overspray for straw, use H3 Tack more concentrated at the rate of 40 lbs in 1000 gallons per acre with the use of 150 to 300 lbs of mulch as a marker.

GENERAL USAGE RATES PER ACRE

SLOPE: FLAT 4:1 3:1 2:1
LB/ACRE: 30-80 50-100 80-120 100-170

MIXING INSTRUCTIONS

  1. Add water to tank to cover blades of lower agitator.
  2. Add H3 Tack slowly while filling tank with agitator at high speed.
  3. After H3 Tack is thoroughly mixed, add mulch seed, and fertilizer.

PACKAGING

H3 Tack is packaged in 50 lb bags, 40 bags per pallet with stretched wrapped cover and pallet liner.

Frequently Asked Questions (FAQ)

Product Basics

H3 Tack is a blend of three professional-grade hydrocolloidal tackifiers used for hydraulically applied erosion control.

It serves as a stand-alone temporary erosion control product or as an additive with wood, paper, or native fiber mulches to increase bonding strength.

When mixed with wood, paper, or native fiber mulches, H3 Tack enhances the tackiness and binding capacity of the slurry. This results in better surface coverage, stronger fiber-to-soil adhesion, and improved resistance to rainfall impact and erosion.

Applications & Mixing

For most hydraulic applications, H3 Tack should be mixed at 10–25 lbs per 1,000 gallons of water, depending on tank size and machine capabilities. For straw overspray, mix 40 lbs per 1,000 gallons per acre along with 150–300 lbs of mulch as a marker.

Recommended application rates per acre are:

Slope Ratio Pounds per Acre (lb/ac)
Flat 30–80 lb/ac
4:1 50–100 lb/ac
3:1 80–120 lb/ac
2:1 100–170 lb/ac

These rates optimize bonding strength and erosion protection based on site conditions.

H3 Tack is compatible with most hydroseeding and hydraulic application equipment. Its quick dispersion and smooth mixing characteristics help prevent blockages and maintain efficient pumping performance.