PRODUCT DESCRIPTION

DXL™ added to road water improves efficiency by retaining water longer. Run off is reduced. Evaporation is slowed. Watering runs can be reduced by 25% – 30%.

DXL™ is a non-corrosive, environmentally friendly formulation of long chain polymers that adds viscosity to the water, reducing runoff.

DXL™ chemically bonds to aggregate dust particles to control dust longer than water alone. The film forming of DXL™ reduces evaporation, allowing water to be effective for longer periods.

APPLICATION GUIDELINES

Simple – Just add DXL™ to your water tank during filling. The liquid quickly disperses in any temperature water so you are ready for application when the tank is full.

Apply at a rate of 1 gallon per 10,000 gallons water. Reapply only as roads become dried. Initial applications are generally higher at 1 gallon per 2500 gallons.

Packaging

Custom packaging to accommodate individual water truck sizes available.

Frequently asked Questions (FAQ)

Product Basics

DXL™ is a liquid dust control additive designed to be mixed with road water. It improves dust suppression efficiency by retaining water longer, reducing runoff, and slowing evaporation.

DXL™ uses long-chain polymer technology to increase water viscosity and chemically bond to aggregate and dust particles. This creates a moisture-retaining film that controls dust significantly longer than water alone.

DXL™ reduces water runoff, slows evaporation, and allows watering cycles to be reduced by approximately 25%–30%. This results in longer-lasting dust control, lower water usage, and reduced labor and equipment operating costs.

Applications & Mixing

DXL™ is easy to use. Simply add the liquid product to your water tank during filling. It disperses quickly in water at any temperature and is ready for application once the tank is full.

Standard maintenance applications use 1 gallon of DXL™ per 10,000 gallons of water. Initial applications typically require higher concentrations, up to 1 gallon per 2,500 gallons of water, depending on dust severity and road conditions.

Yes. DXL™ is fully compatible with standard water trucks, pumps, tanks, and spray systems. It is non-corrosive and safe for equipment when applied at recommended rates.